| |
 |
|
Date |
:
|
| Category |
:
|
| Manufacturer |
:
|
| Author |
:
|
|
Here's a quick run down of the specifications :
- Fan Dimension 60 x 60 x 25 mm
- Rated Speed 3000 - 6800 RPM
- Air Flow 16.13 - 36.11 CFM
- Rated Voltage 12 VDC
- Heat Sink Dimension 60 x 60 x 29mm
- Rja (C/W) = 0.54 - 0.64 (FC-PGA)
Now without further ado, we can get down and dirty with the HS/F.
Click To Enlarge |
|
Here we can see the Skived Fin up close. Notice that around the base of the fins there are no markings indicating pressed or fitted fins. This is all from one solid piece of copper baby! |
Click To Enlarge |
|
Here we can see that the fan, which has the potential to spin at 6800 RPM, has a guard on it. I have stuck my finger in a 6800 RPM fan before, though not on purpose, it still was not a pretty sight. |
Click To Enlarge |
|
Now as we flip it over there is a nice sticker on the bottom warning us to remove before use. |
Click To Enlarge |
|
The base is perfectly flat. As we stated before there were some machining marks on the bottom, but that doesn't seem to make a difference here. Cooler Master did a wonderful job. |
Click To Enlarge |
|
Here you can see the front of the fan.
Note the holographic Cooler Master
sticker. |
Click To Enlarge |
|
Here's what makes the whole thing work. Notice little blue thermistor. That's what controls the fan RPM. |
|
|
