		Date	:
		Category	:
		Manufacturer	:
		Author	:

Jumper Settings

Vcore Auto 1.50 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00

JV4 1-2 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3

JV3 1-2 NC NC NC NC 2-3 2-3 2-3 2-3 2-3 2-3 2-3

JV2 1-2 2-3 2-3 2-3 2-3 NC NC NC NC 2-3 2-3 2-3

JV1 1-2 NC NC 2-3 2-3 NC NC 2-3 2-3 NC NC 2-3

JV0 1-2 NC 2-3 NC 2-3 NC 2-3 NC 2-3 NC 2-3 NC

Note :
This jumper should always be set to Auto by default. We do not guarantee that the mainboard, CPU, or other components will function properly when the voltage is manually set.

Overclocking Jumper : J1

Overclocking Jumper : J1/J4

Single/Dual Processor Jumper : J3

Feature :
Automatically detect 66MHz
and 100MHz FSB

short

Virtually set 66MHz to 100MHz FSB

open

Note :
This jumper is only used for
overclocking. We do not guarantee
that the mainboard, CPU, or other
components will function properly
under these conditions.

FSB	FSB	FSB
CPU Define	short	short 1-2
100MHz	open	short 2-3
133MHz	open	open
Reserved	short	open
Note : J4 is only used for mainboards that support 133MHz FSB.

Feature :

Single processor	open
Dual processors	short 2-3
Coppermine 256K	short 1-2

Print this article

E-mail this article

Discuss this article